M30E 30hp Electric

The M30E features a 30hp WEG 3-phase electric motor and offers the weight and power to spin blades up to 36″. 

Ideal for all applications where gas and diesel emissions present problems.

Features

  • 30hp MEG W22 NEMA Premium 286TS 3-phase electric motor.
  • Accommodates blades from 14″ to 36″. Comes standard with 20″ bladeguard.
  • Hydrostatic transmission – forward/reverse; hydraulic raise/lower.
  • Depth gauge with locking stop.
  • Convenient control console with amp meter, push/pull start switch, on/off brake release and positraction switches.
  • Single speed rpm: 2640; 3-speed rpm: 1176, 1765 and 2647
  • Rear pivot only.

Options

  • 3-Speed Gearbox
  • Night light
  • Bladeguards – 16″, 26″, 30″ and 36″
  • Self-priming Electric Water Pump
  • Custom Colors

Specs

Weight
Single Speed: 1,130 lbs
3 Speed: 1,220 lbs
Dims: (LxWxH) 44″x31″x44″
Rear Pivot Only

Download The Manual

Parts List

Click on section to see the part list.

PART# REQUIRED DESCRIPTION
1100-30E 1 Spindleshaft
1101-30E 2 Pillow-block Bearing
1102-30E 2 4 1/2″ Inner Collar
1103-30E  2 4 1/2″ Outer Collar
1104-30E 1 Left-hand Nut
1105-30E 1 Right-hand Nut
1106-30E 1 Sheave / 7 Groove Pulley
1107-30E 1 Bushing
1120-30E 1 Key – 3/8″
1109-30E 2 Key – 1/4″
1002-30E 6 Belts: Single Speed – 3VX 475
1111-30E 6 Belts: 3-Speed – 3VX 450
1112-30E 1 Left Spindle Stud
1113-30E 1 Right Hand Stud
PART# REQUIRED DESCRIPTION
5100-30E 1 Weldment
5101-30E 1 3″ Pointer Wheel
5102-30E 2 Delrin Bushing
5105-30E 2 Pointer Ends
5103-30E 1 Pointer Cable
PART# REQUIRED DESCRIPTION
5100-30E 1 Weldment
2101-30E 2 Axle – 1″
3002-30E 2 Front Wheel – 6″ x 2″
2103-30E 2 Collar – 1″
2104-30E 2 Pillow-block Bearing – 1″
2105-30E 1 Clevis Pin – 5/8″ x 3.5″
2106-30E 1 Depth Gauge
2114-30E 1 Clevis Pin – 5/8″ x 3″
PART# REQUIRED DESCRIPTION
3100-30E 1 Pump Motor
3101-30E 1 Flow Control Valve
3102-30E 1 Hydraulic Cylinder
3103-30E 1 Raise/Lower Handle Assembly
3106-30E 1 Solenoid
PART# REQUIRED DESCRIPTION
6100-30E 1 Mainframe
6101-30E 1 Console
6102-30E 1 Belt Guard – Left Side
6103-30E 1   Belt Guard – Right Side
6105-30E 1 Rear Access Panel
6107-30E 1 Access Panel – Electrical
3022-30E 2 Handlebar
3026-30E 2 Locking T-Handle
PART# REQUIRED DESCRIPTION
8100-30E 1 Water Distribution Block w/Hose Fittings
8181-30E 2 Outlet Water Hose – 1/4″
8102-30E 1 Inlet Water Hose – 1/2″
9110-30E 1 Water Valve
8104-30E 1 Mud Flap
8109-30E 1 16″ Bladeguard
8105-30E 1 20″ Bladeguard
8106-30E 1 26″ Bladeguard
8107-30E 1 30″ Bladeguard
8108-30E 1 36″ Bladeguard
PART# REQUIRED DESCRIPTION
9116-30E 1 Pull/Push On/Off Switch
9113-30E 1 Console Sticker Set
9103-30E 1 Amp Meter
9108-30E 1 Positraction Switch
9109-30E 1 Brake Release Switch
9123-30E 2 Indicator Lights
2106-30E 1 Depth Gauge
PART# REQUIRED DESCRIPTION
4100-30E 1 Pump
4101-30E  2 Wheel Motor
4102-30E 1 Positraction Manifold
4103-30E 2 Wheel Hub
3001-30E 2 Rear Wheel – 10″ x 3″
4105-30E 1 Filter Assembly
4106-30E 1 Filter – Hydrostatic Oil
4107-30E 1 Reservoir – Plastic
4201-30E 1 Forward/Reverse Lever Assembly
4109-30E 1 Drive Cable – 26″
4110-30E 1 Drive Cable – 33″
4121-30E 1 Hydrostatic Pump Belt – 3VX375
4112-30E 1 Wheel Motor Bracket
4113-30E 1 Hydrostatic Drive Pump Bracket
41010-30E 2 Cable End – Balljoint
PART#

REQUIRED

DESCRIPTION
6100-48 1 Mainframe
6101-48 1 Console
6102-48 1 Belt Guard – Left Side
6103-48 1 Belt Guard – Right Side
3041-48 1 Back Cover
6106-48 1 Fan Guard – Left Side
6107-48 1 Access Panel – Electrical
3022-48 2 Handlebar
3026-48 2 Locking T-Handle
6115-48 1 5 Gallon Fuel Tank
6118-48 1 Gas Cap
2111-48 1 Lower Depth Stop Rod
2119-48 1 Upper Depth Stop Rod
6124-48 1 Fuel Tank Hold-down Strap
PART# REQUIRED DESCRIPTION
3023-30E 1 MF-51 Battery
3113-30E 1 Genius Battery Charger