M72 Mitsubishi

M72 Mitsubishi with a carb compliant 72-horsepower water-cooled gas engine. Comes with a single or three speed gear box.

Features

  • 72-horsepower Mitsubishi gasoline engine. Fully carb compliant.
  • Single-speed lifts a 42″ blade out of the cut, and the 3-Speed  lifts a 48″ blade out of the cut.
  • Independent drive-wheel motors with 4-bolt hubs. Positraction with the flip of a switch.
  • 9-belt drive to spindleshaft or 3-speed gearbox.
  • Oil pressure and volt-meter indicator lights, tach and water temperature gauges, and emergency shutoff switch.
  • Rear pivot only.
  • Easy service and maintenance.

Options

  • The M72 comes with a 20″ bladeguard standard.  26″, 30″, 36″, 42″ & 48″ bladeguards are available separately.
  • 3-Speed Gearbox
  • Electric water pump
  • Night light
  • Custom Colors

Specs

Weight
Single Speed: 1,400 lbs
3 Speed: 1,600 lbs
Dims: (LxWxH) 53″x35″x46″
Rear Pivot Only

Download The Manual

Parts List

Click on section to see the part list.

PART# REQUIRED DESCRIPTION
5108-72 1 Spindleshaft
1101-72 2 Pillow-block Bearing
1113-72 2 5″ Inner Collar
1114-72 2 5″ Outer Collar
1104-72 1 Left-hand Nut
1105-72 1 Right-hand Nut
1108-72 1 Sheave – 9 Groove
1107C-72 1 Bushing – 2012 / 1&1/2″
1120-72 1 Key – 3/8″
1121-72 2 Key – 5/16″
4120-72 9 3VX 500 Belt
1118-72 1 Left-hand Spindle Stud
1119-72 1 Right-hand Spindle Stud
PART# REQUIRED DESCRIPTION
5101-72 1 3″ Pointer Wheel
5102-72 2 Delrin Bushing
5103-72 2 Pointer Cable
5104-72 1 Lift Cable
5112-72 2 Pointer Adjustment
5113-72 1 Pointer Weldment
PART# REQUIRED DESCRIPTION
5100-72 1 Weldment
2101-72 2 Axle – 1″
3004-72 2 Front Wheel – 8 x 2.5″
2103-72 2 Collar – 1″
20002-72 2 Pillow-block Bearing – 1 & 1/4″
2105-72 2 Pin – 5/8″ x 4″
2106-72 1 Depth Gauge, Cable, Spring
PART# REQUIRED DESCRIPTION
7112-72 1 Mitsubishi 2.4L, Gasoline
7129-72 1 Bellhousing – Outer
7131-72 1 Output Shaft/Drive Assembly
20001-72 2 Bearing – 6210
7102-72 1 Output Drive Shaft
7724-72 1 BoWex Male Coupler 
7102E-72 1 BoWex Female Coupler
7103-72 1 Air Filter
7104-72 2 Air Filter Element
4183-72 2 2″ 90° Air Filter Hose
7154-72 1 Air Filter Bracket
PART# REQUIRED DESCRIPTION
3100-72 1 Pump Motor
3101-72 1 Flow Control Valve
3102-72 1 Hydraulic Cylinder
3103-72 1 Raise/Lower Assembly
3106-72 1 Solenoid
PART# REQUIRED DESCRIPTION
8100-72 1 Water Distribution Block W/Hose Fittings
8181-72 2 Outlet Water Hose – 1/4″
8102-72 1 Inlet Water Hose – 1/2″
9110-72 1 Water Valve
8104-72 1 Mud Flap
8105-72 1 20″ Bladeguard
8106-72 1 26″ Bladeguard
8107-72 1 30″ Bladeguard
8108-72 1 36″ Bladeguard
7002-72 1 42″ Bladeguard
7004-72 1 48″ Bladeguard
PART# REQUIRED DESCRIPTION
4100-72 1 Pump
4101-72 2 Wheel Motor
4102-72 1 Positraction Manifold
4001-72 2 Wheel Hub – 1 & 1/4″
3001-72 2 Rear Wheel – 10 x 3″
4105-72 1 Filter Assembly
4106-72 1 Filter – Hydrostatic Oil
4107-72 1 Reservoir – Plastic
4201-72 1 Forward/Reverse Lever Assembly
4114-72 1 Drive Cable 42″
41010-72 2 Cable End – Ball Joint
4121-72 1 3VX 375 Belt
4112-72 1 Wheel Motor Bracket
4002-72 1 Hydrostatic Drive Pump Bracket
PART# REQUIRED DESCRIPTION
6100-72 1 Mainframe
6101-72 1 Console
6102-72 1 Belt Guard – Left Side
6103-72 1 Belt Guard – Right Side
6105-72 1 Back Cover
6106-72 1 Fan Guard – Right Side
3022-72 2 Handlebar
3026-72 2 Locking T-Handle
6122-72 1 Fuel Tank – 7-Gallon
6119-72 1 Fuel Tank Cap
6124-72 2 Fuel Tank Hold-down Strap
2118-72 1 Upper Depth Stop Rod
2111-72 1 Lower Depth Stop Rod
PART# REQUIRED DESCRIPTION
9124-72 1 Tachometer
9101-72 1 Emergency Shutoff Switch
9106-72 1 Ignition Switch
9117-72 1 Throttle Switch
9104-72 1 Engine Service Indicator Light
9113-72 1 Console Sticker Set
PART# REQUIRED DESCRIPTION
7776-72 1 Radiator – Part #502088
7702-72 1 Fan Blade
1111-72 2 Fan Belt – 3VX425
7713-72 1 Idler Pully Spring
7710-72 1 Idler Pulley