M62D Perkins
The M62D with a compliant 62-horsepower water-cooled Perkins diesel engine, is the perfect combination of size and power for any job. Only slightly larger than the M44s and M48s, it resets the bar when it comes to operator-friendly saws.
Model Discontinued.
Features
- 62-horsepower, Perkins 404D-22T water-cooled diesel engine.
- Single-speed lifts a 36-inch blade out of the cut; w/3-Speed Gearbox, lifts a 42-inch blade out of the cut.
- Independent drive-wheel motors with innovative 4-bolt hubs for quick easy wheel changes.
- Positive 8-belt drive to spindleshaft with easy-to-change blade mount studs. A variety of stud lengths allow ganging blades. Should a problem arise, just change the stud while the shaft stays in place. A real time and money saver!
- Oil pressure and volt-meter indicator lights, tach and water temperature gauges, and emergency shutoff switch.
- Positraction switch for cutting where traction can present a problem.
- Easy service and maintenance.
Options
- The M62D comes with a 20-inch bladeguard: 30-, 36- and 42-inch bladeguards are available as options.
- 3-Speed Gearbox
- Electric water pump
- Night light
Specs
Weight
Single Speed: 1,310 lbs
3 Speed: 1,450 lbs
Dims: (LxWxH) 53″x35″x46″
Rear Pivot Only
Download The Manual
Parts List
Click on section to see the part list.
| PART# | REQUIRED | DESCRIPTION |
| 1112-62D | 1 | Spindleshaft |
| 1101-62D | 2 | Pillow-block Bearing |
| 1113-62D | 2 | Inner Collar |
| 1114-62D | 2 | Outer Collar |
| 1104-62D | 1 | Left-hand Nut |
| 1105-62D | 1 | Right-hand Nut |
| 1115-62D | 1 | Sheave |
| 1116-62D | 1 | Bushing |
| 1108-62D | 1 | Key – 3/8″ |
| 1109-62D | 2 | Key – 1/4″ |
| 1117-62D | 8 | 3VX520 Belt (3-Speed) |
| 3030-62D | 1 | Left-hand Spindle Stud |
| 3030-62D | 1 | Right-hand Spindle Stud |
| PART# | REQUIRED | DESCRIPTION |
| 5101-62D | 1 | 3″ Caster/Pointer Wheel |
| 5102-62D | 2 | Delrin Bushing |
| 5103-62D | 2 | Pointer Ends |
| 5104-62D | 1 | Lift Cable Pointer |
| 5105-62D | 1 | Weldment |
| PART# | REQUIRED | DESCRIPTION |
| 2100-62D | 1 | Weldment |
| 2101-62D | 2 | Axle – 1″ |
| 2102-62D | 2 | Wheel – 8×2″ |
| 2103-62D | 2 | Collar – 1″ |
| 2104-62D | 2 | Pillow-block Bearing – 1.25″ |
| 2105-62D | 2 | Pin – 5/8×4″ |
| 2106-62D | 1 | Depth Gauge, Cable, Spring |
| PART# | REQUIRED | DESCRIPTION |
| 7112-62D | 1 | Perkins 404D-22T Diesel |
| 7113-62D | 1 | Bellhousing – Outer Plate |
| 7114-62D | 1 | Output Shaft/Drive Assembly |
| 7102-62D-A | 2 | Bearing – Output/Drive Assembly |
| 7115-62D-B | 1 | Shaft – Output/Drive Assembly |
| 7102-62D-D | 1 | BoWex Male Coupler Output/Drive Assembly |
| 7116-62D-E | 1 | BoWex Female Coupler Output/Drive Assembly |
| 7103-62D | 1 | Air Filter |
| 7104-62D | 2 | Air Filter Elements |
| 7117-62D | 1 | Hose – 90-Degree Elbow – 2″ – 1-5/8″ Reducer |
| 7119-62D | 1 | Air Filter Bracket |
| 7110-62D | 1 | Murphy Switch – Overheat Reset Switch |
| PART# | REQUIRED | DESCRIPTION |
| 3100-62D | 1 | Pump Motor |
| 3101-62D | 1 | Flow Control Valve |
| 3102-62D | 1 | Hydraulic Cylinder |
| 3103-62D | 1 | Needle Valve, Raise/Lower Assembly |
| 3104-62D | 1 | Solenoid |
| PART# | REQUIRED | DESCRIPTION |
| 8100-62D | 1 | Water Distribution Block W/Hose Fittings |
| 8181-62D | 2 | Outlet Water Hose – 1/4″ |
| 8102-62D | 1 | Inlet Water Hose – 1/2″ |
| 8103-62D | 1 | Water Valve |
| 8104-62D | 1 | Mud Flap |
| 8105-62D | 1 | 20″ Bladeguard |
| 8106-62D | 1 | 26″ Bladeguard |
| 8107-62D | 1 | 30″ Bladeguard |
| 8108-62D | 1 | 36″ Bladeguard |
| PART# | REQUIRED | DESCRIPTION |
| 4100-62D | 1 | Pump |
| 4101-62D | 2 | Drive Motor |
| 4102-62D | 1 | Positraction Manifold |
| 4103-62D | 2 | Wheel Hub |
| 4104-62D | 2 | Wheel – 10×3″ |
| 4105-62D | 1 | Filter Assembly |
| 4106-62D | 1 | Filter |
| 4107-62D | 1 | Reservoir – Plastic |
| 4109-62D | 1 | Drive Cable |
| 4110-62D | 2 | Cable End – Balljoint |
| 4116-62D | 2 | 3VX350 Belt |
| 4112-62D | 1 | Wheel Motor Bracket |
| 4117-62D | 1 | Hydrostatic Drive Pump Bracket |
| PART# | REQUIRED | DESCRIPTION |
| 6117-62D | 1 | Mainframe |
| 6118-62D | 1 | Console |
| 6119-62D | 1 | Belt Guard – Left Side |
| 6120-62D | 1 | Belt Guard – Right Side |
| 6121-62D | 1 | Air Intake – Rear |
| 6106-62D | 1 | Air Exhaust – Right Side |
| 6108-62D | 2 | Handlebar |
| 6109-62D | 2 | Locking T-Handle |
| 6122-62D | 1 | Fuel Tank — 7-Gallon |
| 6123-62D | 1 | Fuel Tank Cap |
| 6126-62D | 1 | Depth Stop Rod Assembly |
| 6127-62D | 1 | Depth Stop Handle Assembly |
| PART# |
REQUIRED |
DESCRIPTION |
| 9101-44D | 1 | Emergency Shutoff Switch |
| 9107-44D | 1 | Tachometer/Hour Meter |
| 9108-44D | 1 | Ignitions Switch |
| 9109-44D | 1 | Push/Pull Engine Speed Control Switch |
| 9110-44D | 1 | Temperature Gauge |
| 9111-44D | 1 | Amp Indicator Light |
| 9112-44D | 1 | Oil Pressure Indicator Light |
| 9113-44D | 1 | Upper Console Sticker |
| 9114-44D | 1 | Lower Console Sticker |
| PART# | REQUIRED | DESCRIPTION |
| 7120-62D | 1 | Radiator |
| 7121-62D | 1 | Fan Blade |
| 7123-62D | 1 | Fan Shaft |
| 7122-62D | 1 | Fan Belt – 3VX425 |
| 7114-62D | 1 | Spring |