M35 Briggs & Stratton Vanguard
The compact M35 features a gas powered 35 horsepower Briggs & Stratton Vanguard Big Block – 4 Stroke, air cooled, VTwin. Offers the best amenities package and price.
FEATURES
Briggs & Stratton Vanguard Big Block – 4 Stroke, air cooled, VTwin 35hp, Gas.
Lifts up to a 26" blade out of the cut. Comes standard with a 20" blade guard.
Hydrostatic forward and reverse.
5-belt blade drive.
Hydraulic raise/lower
Rear pivot only.
OPTIONS
Electric water pump
Night light
16" and 26" Blade guards
Custom Colors
DOWNLOAD THE MANUAL
M-35 CLEAN AIR CERT
PARTS LIST
Click on section to see part list.
SPINDLESHAFT ASSEMBLY
| PART# | REQUIRED | DESCRIPTION |
| 1100-35 | 1 | Spindleshaft |
| 1101-35 | 2 | Pillow-block Bearing |
| 1115-35 | 2 | 4 1/2" Inner Collar |
| 1116-35 | 2 | 4 1/2" Outer Collar |
| 1104-35 | 1 | Left-hand Nut |
| 1105-35 | 1 | Right-hand Nut |
| 1106-35 | 1 | Sheave – 5-groove |
| 1107-A | 1 | Bushing – Taper Lock |
| 1121-35 | 1 | Key – 5/16" |
| 1109-35 | 2 | Key – 1/4" |
| 4121-35 | 5 | Drive Belt: 3VX 375 |
POINTER ASSEMBLY
| PART# | REQUIRED | DESCRIPTION |
| 5101-35 | 1 | 3" Pointer Wheel |
| 5102-35 | 2 | Delrin Bushing |
| 5103-35 | 2 | Pointer End Cable |
| 5104-35 | 1 | Lift Cable |
| 5100-35 | 1 | Weldment |
FRONT AXLE ASSEMBLY
| PART# | REQUIRED | DESCRIPTION |
| 5100-35 | 1 | Weldment |
| 3002-35 | 2 | Front Wheel – 6 x 2" |
| 2103-35 | 2 | Collar – 1" |
| 2104-35 | 2 | Pillow-block Bearing – 1" |
| 2105-35 | 2 | Pin – 5/8" x 3.5" |
HYDRAULIC RAISE/LOWER ASSEMBLY
| PART# | REQUIRED | DESCRIPTION |
| 3100-35 | 1 | Pump Motor |
| 3101-35 | 1 | Raise Flow Control Valve |
| 3102-35 | 1 | Hydraulic Cylinder |
| 3103-35 | 1 | Raise/Lower Assembly |
| 3106-35 | 1 | Solenoid |
| 3105-35 | 1 | Lowering Solenoid Valve |
BLADE GUARD ASSEMBLY
| PART# | REQUIRED | DESCRIPTION |
| 8100-35 | 1 | Water Distribution Block w/Hose Fittings |
| 8181-35 | 2 | Outlet Water Hose – 1/4" |
| 8102-35 | 1 | Inlet Water Hose – 1/2" |
| 9110-35 | 1 | Water Valve |
| 8104-35 | 1 | Mud Flap |
| 8109-35 | 1 | 16" Blade guard |
| 8105-35 | 1 | 20" Blade guard |
| 8106-35 | 1 | 26" Blade guard |
FRAME CONSOLE
| PART# | REQUIRED | DESCRIPTION |
| 6100-35 | 1 | Mainframe |
| 6101-35 | 1 | Console |
| 6102-35 | 1 | Belt Guard – Left Side |
| 6104-35 | 1 | Belt Guard – Right Side Rear |
| 6105-35 | 1 | Rear Cover |
| 3022-35 | 2 | Handlebar |
| 6109-35 | 2 | Locking T-Handle |
| 6110-35 | 1 | 4 Gallon Fuel Tank |
| 6118-35 | 1 | Fuel Tank Cap |
HYDROSTATIC DRIVE ASSEMBLY
| PART# | REQUIRED | DESCRIPTION |
| 4100-35 | 1 | Hydraulic Pump |
| 4101-35 | 2 | Wheel Motor |
| 4103-35 | 2 | Wheel Hub |
| 3001-35 | 2 | Rear Wheel – 10" x 3" |
| 4105-35 | 1 | Filter Assembly |
| 4106-35 | 1 | Filter – Hydrostatic Oil |
| 4107-35 | 1 | Reservoir – Plastic |
| 4201-35 | 1 | Forward/Reverse Lever Assembly |
| 4109-35 | 1 | Drive Cable 26" |
| 4110-35 | 1 | Drive Cable 33" |
| 4111-35 | 1 | Hydraulic Pump Belt 4L370, A-35 |
| 4112-35 | 1 | Wheel Motor Bracket |
| 4113-35 A&B | 1 | Hydrostatic Drive Pump Bracket |
| 41010-35 | 2 | Cable End – Balljoint |
ENGINE
| PART# | REQUIRED | DESCRIPTION |
| 7106-35 | 1 | Briggs & Stratton Vanguard Big Block – 4 Stroke – Gasoline |
| 7103-35 | 1 | Air Filter |
| 7104-35 | 2 | Air Filter Element |
| 3031-35 | 1 | Throttle Cable 48" |
| 77201-35 | 1 | Choke Cable |
| 7113-35 | 1 | Sheave – 6-groove |