M44D Kubota
The M44D fleet saw features a compliant 44-horsepower turbocharged Kubota diesel. It is a cost-effective, efficient, easy-to-maintain alternative to anything comparable on the market. Now available with an optional 3-speed gearbox.
Model Discontinued.
FEATURES
44-horsepower turbocharged Kubota V1505-TE diesel engine.
Up to 36-inch blade capacity out of the cut.
Independent drive-wheel motors with innovative 4-bolt hubs for quick easy wheel changes.
Positive 6-belt drive to spindleshaft with easy-to-change blade mount studs. A variety of stud lengths allow ganging blades. Should a problem arise, just change the stud while the shaft stays in place. A real time and money saver!
Oil pressure, water temperature and volt-use monitored by direct-display and indicator lights. Instrumentation and safety features also includes tach/hour-meter and emergency shutoff switch.
CARB compliant. Easy to service and maintain.
OPTIONS
The M44D comes with a 20-inch bladeguard, with 26-inch, 30-inch and 36-inch guards available as options.
3-Speed Gearbox
Electric water pump
Night light
DOWNLOAD THE MANUAL
PARTS LIST
Click on section to see part list.
SPINDLESHAFT ASSEMBLY
PART# |
REQUIRED |
DESCRIPTION |
| 1100-44D | 1 | Spindleshaft |
| 1101-44D |
2 | Pillow-block Bearing |
| 1102-44D |
2 | Inner Collar |
| 1103-44D | 2 | Outer Collar |
| 1104-44D | 1 | Left-hand Nut |
| 1105-44D | 1 | Right-hand Nut |
| 1106-44D | 1 | Sheave |
| 1107-44D | 1 | Bushing |
| 1108-44D | 1 | Key – 3/8-inch |
| 1109-44D | 2 | Key – 1/4-inch |
| 1110-44D | 6 | Belt 3VX425, w/3-Speed Gearbox 3VX400 |
| 1111-44D | 1 | Left-hand Spindle Stud |
| 1112-44D | 1 | Right-hand Spindle Stud |
POINTER ASSEMBLY
PART# |
REQUIRED |
DESCRIPTION |
| 5101-44D |
1 | 3" Pointer Wheel |
| 5102-44D | 2 | Delrin Bushing |
| 5103-44D | 2 | Pointer Ends |
| 5104-44D | 1 | Lift Cable |
| 5105-44D | 1 | Pointer Weldment |
FRONT AXLE ASSEMBLY
PART# |
REQUIRED |
DESCRIPTION |
| 2100-44D | 1 | Weldment |
| 2101-44D | 2 | Axle – 1" |
| 2102-44D | 2 | Wheel – 6×2" |
| 2103-44D | 2 | Collar – 1" |
| 2104-44D | 2 | Pillow-block Bearing – 1" |
| 2105-44D | 1 | Pin – 5/8×3.5" |
| 2106-44D | 1 | Depth Gauge, Cable, Spring |
| 2107-44D | 1 | Pin – 5/8×3" |
HYDRAULIC RAISE/LOWER ASSEMBLY
|
PART# |
REQUIRED |
DESCRIPTION |
| 3100-44D | 1 | Pump Motor |
| 3101-44D | 1 | Flow Control Valve |
| 3102-44D | 1 | Hydraulic Cylinder |
| 3103-44D | 1 | Raise/Lower Handle Assembly |
| 3104-44D | 1 | Solenoid |
ENGINE
|
PART# |
REQUIRED |
DESCRIPTION |
| 7100-44D | 1 | Kubota V1505-TE Turbocharged Diesel 1.5-Liter |
| 7101-44D |
1 | Bellhousing – Inner/Outer |
| 7102-44D | 1 | Output Shaft/Drive Assembly |
| 7102-44D-A | 2 | Bearing – Output/Drive Assembly |
| 7102-44-B | 1 | Shaft – Output/Drive Assembly |
| 7102-44D-C | 1 | BoWex Male Coupler Output/Drive Assembly |
| 7102-44D-D | 1 | BoWex Female Coupler Output/Drive Assembly |
| 7103-44D | 1 | Air Filter |
| 7104-44D | 2 | Air Filter Elements |
| 7105-44D | 2 | Hose – 90-Degree Elbow |
| 7106-44D | 1 | Hose Coupler |
| 7107-44D | 1 | Air Filter Bracket |
| 7110-44D | 1 | Murphy Switch – Overheat Reset Switch |
| 7111-44D | 1 | Fuel Filter |
BLADEGUARD ASSEMBLY
| PART# | REQUIRED | DESCRIPTION |
| 8100-44D | 1 | Water Distribution Block W/Hose Fittings |
| 8181-44D | 2 | Outlet Water Hose – 1/4" |
| 8102-44D | 1 | Inlet Water Hose – 1/2" |
| 8103-44D | 1 | Water Valve |
| 8104-44D | 1 | Mud Flap |
| 8105-44D | 1 | 18" Bladeguard |
| 8106-44D | 1 | 24" Bladeguard |
| 8107-44D | 1 | 30" Bladeguard |
| 8108-44D | 1 | 36" Bladegaurd |
HYDROSTATIC DRIVE ASSEMBLY
|
PART# |
REQUIRED |
DESCRIPTION |
| 4100-44D | 1 | Pump |
| 4101-44D | 2 | Drive Motor |
| 4102-44D | 1 | Traction Manifold |
| 4103-44D | 2 | Wheel Hub |
| 4104-44D | 2 | Wheel – 10×3" |
| 4105-44D | 1 | Filter Assembly |
| 4106-44D | 1 | Filter |
| 4107-44D | 1 | Reservoir – Plastic |
| 4108-44D | 1 | Forward/Reverse Friction Lever Assembly |
| 4109-44D | 1 | Cable |
| 4110-44D | 2 | Cable End – Balljoint |
| 4112-44D | 1 | Wheel Motor Bracket |
| 4113-44D | 1 | Hydrostatic Drive Pump Bracket |
| 4114-44D | 1 | Hydrostatic Pump Belt – 3VX315 |
COOLING SYSTEM
|
PART# |
REQUIRED |
DESCRIPTION |
| 7111-44D | 1 | Radiator |
| 7112-44D | 1 | Fan Blade |
| 7113-44D | 1 | Fan Shaft |
| 7114-44D | 1 | Idler Pulley Assembly |
| 7115-44D | 1 | Spring |
| 7116-44D | 1 | Fan Belt – 3VX475 |
FRAME CONSOLE
|
PART# |
REQUIRED |
DESCRIPTION |
| 6100-44D | 1 | Mainframe |
| 6101-44D | 1 | Console |
| 6102-44D | 1 | Belt Guard – Left Side |
| 6103-44D | 1 | Belt Guard – Right Side |
| 6104-44D | 1 | Air Intake – Rear |
| 6105-44D | 1 | Air Exhaust – Left Side |
| 6106-44D | 1 | Access Panel – Electrical |
| 6108-44D | 2 | Handlebar |
| 6109-44D | 2 | Locking T-Handle |
| 6109-44D | 1 | Fuel Tank |
| 6110-44D | 1 | Fuel Tank Cap |
| 6111-44D | 1 | Depth Stop Rod Assembly |
| 6112-44D | 1 | Depth Stop Handle Assembly |
| 6115-44D | 2 | Fuel Tank Hold-down Strap |
CONSOLE
|
PART# |
REQUIRED |
DESCRIPTION |
| 9101-44D | 1 | Emergency Shutoff Switch |
| 9107-44D | 1 | Tachometer/Hour Meter |
| 9108-44D | 1 | Ignitions Switch |
| 9109-44D | 1 | Push/Pull Engine Speed Control Switch |
| 9110-44D | 1 | Temperature Gauge |
| 9111-44D | 1 | Amp Indicator Light |
| 9112-44D | 1 | Oil Pressure Indicator Light |
| 9113-44D | 1 | Upper Console Sticker |
| 9114-44D | 1 | Lower Console Sticker |